5X00063G01
5X00063G01
5X00063G01
在现代自动化系统投资中，由于硬件设备部
分只占用整个系统中较少的成本，则编写工程应用
软件的成本就变得越来越重要。通常来讲，一个自
动化项目的工程应用软件费用约占到了整个项目的
50%左右，这不难看出，成本结构的迁移给用户创
造了优化项目投资的机会，所以，必须从工程编程
一开始就要考虑降低费用!
这就是我们开发Freelance 800F系统的目的:
保持硬件价格与那些可编程逻辑控制器一致的情况
下，通过减少用户工程费用来提高成本效率。
Freelance 800F过 程控制系统如何帮助用户减
少工程费用?
●通过使用一个完整的工程工具(Control Builder
F)来配置组态整个控制系统，包括自动化功
能、操作员界面显示和记录，以及组态现场总线.
设备(PROFIBUS， FOUNDATION Fieldbus ,
HART等等)和设备参数设定。
●在过程控制站和操作员站之间自动生成全局的数
据通信。
r future technology upgrading and maintenance.
System engineering configuration is very convenient. The configuration language is based on ie0611313 industrial standard and provides function block diagram (FBD) and ladder diagram
(LD), instruction list (IL), sequential function diagram (SFC), structured text (st) and other graphical configuration modes. The system contains about 220 functions
The algorithm library of energy block, the basic library with more than 200 graphic symbols and the extended library with a large number of 3D symbols.
The system uses the same set of configuration tool software to complete the configuration and commissioning of process level, operation level and even fieldbus instruments, and uses the same
A global database.
The system scale has strong scalability. The single system supports 1 to 100 control stations and 100 operation stations at most. Each control
The station can support thousands of i/0 points at most, and the scale of the whole system can be expanded. The hardware of the system control station is all metal enclosure, which can withstand the most
Harsh industrial environment. The equipment can be installed in the cabinet or on the wall. The system complies with all current EMC standards and has CE standards
Annals.
Industrial “DCS system design purpose: the most economical engineering investment and the most powerful control function.
Industria1 “five features of DCS system:
1、 The comprehensive control system integrates DCS & PLC & field bus;
2、 RISC superscalar high-speed CPU with super performance;
3. High reliability, strict industrial application practice, and application performance of more than 1000 sets in China;
4、 Good openness, flexibility and expansibility;
5、 Easy engineering, friendly interface and simple maintenance;
2. Industria1 “system communication
Industrial ial “the system uses the international standard industrial bus. The field controller supports PROFIBUS, FF, MODBUS, can and other countries
International standard fieldbus, PROFIBUS is the most widely used open fieldbus international standard in the world, which is divided into FMS, DP and pa
Level III, DP communication rate can be up to 12MB. PROFIBUS is used to connect distributed i/0 stations, field bus instruments and other intelligent devices.
The communication among process station, operator station and engineer station is realized through the system bus diginets (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin cable, thick cable or optical fiber cable and mixed media) and network topology can be selected for the system bus
Due to the adoption of tcp/ip protocol, the system can also realize ultra long distance communication with the help of public telephone network (dial-up mode) or satellite.
PLC and other subsystems communicate with industrial “system through Modbus protocol interface. The system also supports iec870-5 over control coordination
Discussion.
The flash EPROM inside PS provides more than 220 function modules (control algorithm subroutines), in addition to the base specified in IEC 61131 3 standard
In addition to this content, many powerful and strictly tested function blocks from practical engineering applications are also expanded. Any complex control
All schemes can be realized by the combination of these function blocks.
The function blocks provided by the system mainly fall into the following categories:
o
Analog quantity processing
o
Global database of Fieldbus equipment, control level and HMI (human-machine interface)
Module identification with production operating parameters
c
Complete self diagnosis
Compact and rugged design
Front panel wiring
DIN rail (U-shaped) mounting well can be directly installed on the wall, which is simple and convenient
o
Allowable operating ambient te
Industrial ial “field controller PS is a special process control station, which is embedded with a fieldbus communication interface for users to use
Fieldbus technology provides a very flexible choice. Each PS is allowed to insert 4 fieldbus interface cards (card types can be different),
Each card is connected to a fieldbus to collect process data and diagnostic information from the bus. The interface card is easy to replace and plug and play
(plug & play) and can be plugged in and out with power.
The field controller PS has the following features:
o
Flexible: it supports all international standard open fieldbus and can be mixed
4 high-speed fieldbuses can be connected at the same time (max. 12 MBD)
Simple project: only use the same tool CBF (control build f) software for configuration, debugging and diagnosis
mouth
Digital quantity processing
Loop adjustment
Logical sequence control
c
Logical operation
Monitoring function
Acquisition function
c
Arithmetic operation
c
Tcp/ip protocol communication interface
Modbus protocol communication interface
1ec870-5 protocol communication interface (telecontrol)
4.2 field controller PS
Access to all information from the site, including equipment management information
