系统符合所有当前EMC标准并具CE标
志。
Industrial” DCS系统设计宗旨:最节省的工程投入，最强大的控制功能。
Industria1″ DCS系统五大特点:
一、全能综合型控制系统，集DCS & PLC & Field Bus 之大成;
二、采用RISC SuperScalar高速CPU，具有超级性能;
三高可靠性，严格工业应用实践，在中国1000 余套应用业绩;
四、具有良好的开放性、灵活性及扩展性;
五、工程容易，界面友好，维护简单;
2、Industria1″系统通讯
Industr ial”系统使用国际标准工业总线。现场控制器支持Profibus、FF、ModBus、 Can等各种国
际标准现场总线，Profibus 是目前世界上应用最广泛的开放型现场总线国际标准，分为FMS、DP及PA
三级，DP通讯速率可高达12Mb。Profibus用于连接分布式I/0站及现场总线仪表等智能设备。
过程站、操作员站及工程师站之间的通讯是通过系统总线DigiNetS (工业以太网)实现的。用户
可以为系统总线选择不同的传输介质(RJ45 双绞线、细缆、粗缆或光纤电缆以及混合介质)和网络拓
朴布局，由于采用TCP/IP协议，系统还可借助公共电话网(拨号方式)或卫星实现超远距离通讯。
PLC等子系统则通过ModBus协议接口与Industrial”系统进行通讯。系统还支持IEC870-5過控协
议。
PS内部的Flash EPROM 提供220多种功能模块(控制算法子程序)，除IEC 61131 3标准规定的基
本内容外，还扩充了许多来自于实际工程应用、且功能强大并经过严格测试的功能块。任何复杂控制
方案均可由这些功能块组合实现。
系统提供的功能块主要有以下几大类:
o
模拟量处理
o
数字量处理
回路调节
逻辑顺序控制
c
逻辑运算
监视功能
采集功能.
c
算术运算
c
TCP/IP协议通讯接口
Modbus协议通讯接口
1EC870-5协议通讯接口(Telecontrol)
4.2现场控制器 PS
Industr ial”现场控制器PS是- -种特殊的过程控制站，它内嵌了现场总线通讯接口，为用户使用
现场总线技术提供了很灵活的选择。每个PS允许插入4块的现场总线接口卡件(卡件类型可以不同)，
每个卡件连接1条现场总线以采集来自总线的过程数据和诊断信息，接口卡件更换容易且即插即用
(Plug & Play)，且均可带电插拔。
现场控制器PS具有以下特性:
o
灵活:支持所有国际标准开放式现场总线，并可混合使用
可同时连接4条高速现场总线(最大12 MBd)
工程简单:仅使用同一工具CBF (Control Build F)软件进行组态、调试和诊断
口
可访问包括设备管理信息在内的所有来自现场的信息
现场总线设备、控制级及HMI (人机界面)使用统- -的全局数据库
带有生产操作参数的模件识别
c
完全的自诊断
紧凑坚固的设计
前面板接线
DIN轨(U型)安装井可直接墙装，简单方便
o
允许运行环境温度…60 C，
List other features include:
Project-wide modification of names, comments, data or module types
Search and display based on specific criteria
Cross reference can be used in systems that use a large number of variables or process points
Programs and drawings to quickly find the desired variable or process point within the scope
KUC755AE117
noodle.
ABB is the world’s largest in measurement and process automation
One of the equipment and system suppliers.
An important factor in maintaining this market position is the quality of our products
quantity, and quality from manufacture all the way to service. ABB automation early
In 1990, it obtained the DQS certificate based on ISO9001 certification,
EQnet quality based on ISO 9000/EN 29000 was subsequently achieved
Certification.
However, the Freelance 800F is more than technical excellence, I
We have also spent a lot of effort in proper planning, installation and revision too
This makes engineering design and maintenance faster, more economical and more efficient.
Industrial” is a world-leading all-round integrated open control system launched by ABB Group Automation Headquarters.
It integrates the advantages of traditional DCS and PLC in one body and supports a variety of international field bus standards. It has both the complex analog loop regulation capability of DCS
Power-friendly human-machine interface (HMI) and convenient engineering software, and at the same time have high-speed logic and sequence control equivalent to high-end PLC indicators.
control performance. The system can be connected to both conventional I/0 and various field bus devices such as Profibus, FF, CAN, and Modbus. system tool
It has a high degree of flexibility and excellent scalability, whether it is the control of small production units, or the control of ultra-large-scale whole plants – integrated control, even
The Industrial” system can handle the application of field equipment maintenance management and cross-plant production management control with ease.
An important member of the Industrial” family,
